1

Firmware 6.2.94

Hi,

I am looking for old firmware, because the new one .147 creating green filter image after publishing the new presentation.

TV is connected through ethernet cable and its working properly with old version 6.2.94 of the FW but not with the new version..

I could found any older FW on this site, so can anybody provide me?

8 comments

  • Avatar
    Yuriy Official comment

    Hi Francesco,

     

    Please specify what model do you want it for and I'll pass you a link.

  • 0
    Avatar
    Francesco Kriklan

    Hi Yuriy,

     

    Do you need to know the model of tv or brightauthor? We are using BA 4.6.0.18 and we used BA 4.6.0.8 is that an issue as well?

  • 0
    Avatar
    Yuriy

    I mean the player model - is it an LS3, HD3, XD3, XT3?

    Also recommended but not mandatory would be upgrading BrightAuthor to 4.6.0.35 if you're using the latest firmware. If you want to roll back to 6.2.94, your current BA version will suffice just fine.

  • 0
    Avatar
    Francesco Kriklan

    The Old one is HD1022 and new one HD1020 is that correct?

     

    I have an issue, because its for big company and we are not suppose to install any software outside of our appstore..

  • 0
    Avatar
    Yuriy

    It's the other way around. :) HD1020 is older, HD1022 is newer.

    6.2.94 for HD1022 can be downloaded here: https://s3.amazonaws.com/brightsignbiz/firmware/hd2/6.2/6.2.94/brightsign_hd2_update_6.2.94.zip

    As for HD1020, its latest firmware is 6.1.76:

    http://brightsignbiz.s3.amazonaws.com/firmware/hd/6.1/6.1.76/brightsign_hd_update_6.1.76.zip

  • 0
    Avatar
    Francesco Kriklan

    I tried that FW and now its just black screen with HD1022 with sn of TV and can not connect through the Bright Author 

  • 0
    Avatar
    Yuriy

    Make sure that the SD card is still inside and that you didn't blank it out. Otherwise you may need to re-setup the player again.

  • 0
    Avatar
    Francesco Kriklan

    The SD card is still in it "router", but cannot connect from my pc or other one to.. I checked some how-to but without any results

Please sign in to leave a comment.