0

Unable to access a BrightSign at that ip address - LS423

Hi,

I've been trying to "reach" my LS423 for over a week now, here is what I've done to test so far:

1- I tried on 2 different networks, one Corporative one that is highly secured and another one that is just like an home network, same result, can't reach the device

2- I tried to Update BrightAuthor to the latest version: 4.7.0.8 - Same result

3- I am able to ping the Device in Windows without any issue

4- The latest firmware is in the Device: 7.0.19

5 - I tried with 2 different LS423 and they both do the same thing

6 - Tried with 3 different micro SD card - Same result

7 - I tried to install the Bonjour for Windows (may not be the right one I found on Apple) but same result

I would say, it was working fine about 6 months ago but had to work on other projects so I've put aside the devices and now I can't do anything except connect them in standalone and put pictures on the SD card, witch is not the way we want to use them...

Any other things I probably forgot to test?

Thank you very much.

Have a great day.

9 comments

  • 0
    Avatar
    Bright Scripters info[at]brightscripters.com

    If you set up the player with enabled Diagnostics Web Server, can you load the web page?

  • 0
    Avatar
    Benoit Beaudoin

    Hi,

    Sorry I forgot to mention that Yes I am able to load the web page when Enable Diagnostic web server is enabled.

    Thank you.

  • 0
    Avatar
    Bright Scripters info[at]brightscripters.com

    In a secured environment, Bonjour may or may not work.

    Have you tried adding the player to BA by its IP address?

    If that doesn't work, you could try and start over, by doing a factory reset, and set up the player again for Local File Networking.

    https://brightsign.zendesk.com/hc/en-us/articles/218065977-Performing-a-factory-reset

  • 0
    Avatar
    Benoit Beaudoin

    I am not able to add it with Bright Author, it says there are no device associated to this IP address.

    Regarding the factory reset, I tried with both devices I had on hand.

    Same thing for both of them on the 2 different networks I tried.

    Yet the only thing I did not try is to test with a Windows 7.

    Both computers on both different networks are in Win10.

    Could this be the issue?

    Thank you.

  • 0
    Avatar
    Bright Scripters info[at]brightscripters.com

    We have not experienced issues with Win 10.

    It is possible that some TCP ports are blocked, while 80 is available.

    Can you try at a lab environment? Meaning: a laptop, and player, connected to a switch isolated from the corporate network.

    You would need to set static IP, or use a local DHCP that you have control of. Bonjour may work, but I cannot say for sure.

     

  • 0
    Avatar
    Brandon

    After the factory reset did you configure the player for Local File Networking again?
    It *must* be configured for LFN in order to add it to the Networked Units list in the Local Network Publish view.
    http://www.BrightSign.biz/quickstart

  • 0
    Avatar
    Benoit Beaudoin

    Wow, wow, wow.

    Guys, sorry for all of that, I did a rookie mistake

    An image speaks by itself.

    Sorry for all the trouble, but it may help someone else.

    Thank you for you time on this case.

    Have a great day.

     

  • 0
    Avatar
    Brandon

    :) Happens even to the best of us from time to time.

  • 1
    Avatar
    Rafael

    I have the same problem, but I have them at Networked with Local File Networking and still have the problem. It was working fine a few days ago, but after sending a video to the player, it reseted and changed to DHCP by itself and after a hard time I managed to get control of the HD223 but still I can't load videos because I can only access it via web and not via BA. The problem is that the player is in Florida and I'm in Puerto Rico... Not good for me because I was the one that suggested my customer to migrate from another platform to this one...

    This is the log file I got after giving a factory reset and loading manually a few files on the root.

    [ 0.000] Booting Linux on physical CPU 0x0
    [ 0.000] Linux version 3.14.28-1.14+bs6.2.147 (jenkins@bob) (gcc version 4.9.3 (GCC) ) #1 Fri Jun 23 17:29:02 BST 2017
    [ 0.000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=50c53c7d
    [ 0.000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
    [ 0.000] Machine model: pantera
    [ 0.000] moving dtb from 0x08000000 to 0x00a0e038
    [ 0.000] BMEM 0/2 start=0x10000000, size=0x00000000 in memory bank start=0x00000000, size=0x10000000
    [ 0.000] BMEM 1/2 start=0x10000000, size=0x22000000 in memory bank start=0x10000000, size=0x30000000
    [ 0.000] bmem: Reserved 544 MiB at 0x10000000
    [ 0.000] Memory policy: Data cache writeback
    [ 0.000] On node 0 totalpages: 262144
    [ 0.000] free_area_init_node: node 0, pgdat c075c530, node_mem_map cf7f9000
    [ 0.000] Normal zone: 512 pages used for memmap
    [ 0.000] Normal zone: 0 pages reserved
    [ 0.000] Normal zone: 65536 pages, LIFO batch:15
    [ 0.000] HighMem zone: 1536 pages used for memmap
    [ 0.000] HighMem zone: 196608 pages, LIFO batch:31
    [ 0.000] CPU: All CPU(s) started in SVC mode.
    [ 0.000] MCP: Disabling write pairing
    [ 0.000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
    [ 0.000] pcpu-alloc: [0] 0
    [ 0.000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 261632
    [ 0.000] Kernel command line:
    [ 0.000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    [ 0.000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    [ 0.000] Memory: 472664K/1048576K available (4467K kernel code, 322K rwdata, 2112K rodata, 672K init, 370K bss, 575912K reserved, 0K cma-reserved, 229376K highmem)
    [ 0.000] Virtual kernel memory layout:
    [ 0.000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    [ 0.000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
    [ 0.000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
    [ 0.000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
    [ 0.000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    [ 0.000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
    [ 0.000] .text : 0xc0008000 - 0xc067501c (6581 kB)
    [ 0.000] .init : 0xc0676000 - 0xc071e08c ( 673 kB)
    [ 0.000] .data : 0xc0720000 - 0xc07708c8 ( 323 kB)
    [ 0.000] .bss : 0xc07708c8 - 0xc07cd3cc ( 371 kB)
    [ 0.000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [ 0.000] NR_IRQS:16 nr_irqs:16 16
    [ 0.000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 89)
    [ 0.000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc441000, parent irq: 66)
    [ 0.000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 91)
    [ 0.000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 56)
    [ 0.000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a380, parent IRQ(s): 1)
    [ 0.000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc417280, parent IRQ(s): 1)
    [ 0.000] Architected cp15 timer(s) running at 27.00MHz (virt).
    [ 0.000] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
    [ 0.000] Switching to timer-based delay loop
    [ 0.000] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=270000)
    [ 0.000] pid_max: default: 32768 minimum: 301
    [ 0.000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [ 0.000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [ 0.004] CPU: Testing write buffer coherency: ok
    [ 0.004] Setting up static identity map for 0x435b58 - 0x435b88
    [ 0.006] devtmpfs: initialized
    [ 0.007] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
    [ 0.008] regulator-dummy: no parameters
    [ 0.008] NET: Registered protocol family 16
    [ 0.008] DMA: preallocated 256 KiB pool for atomic coherent allocations
    [ 0.009] cpuidle: using governor ladder
    [ 0.009] cpuidle: using governor menu
    [ 0.012] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered
    [ 0.012] syscon f0442400.syscon: regmap [mem 0xf0442400-0xf04427ff] registered
    [ 0.013] syscon f0462000.syscon: regmap [mem 0xf0462000-0xf046200f] registered
    [ 0.013] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040411f] registered
    [ 0.013] syscon f0404120.syscon: regmap [mem 0xf0404120-0xf0404133] registered
    [ 0.013] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070f] registered
    [ 0.013] syscon f0410710.syscon: regmap [mem 0xf0410710-0xf0410717] registered
    [ 0.013] syscon f0901004.syscon: regmap [mem 0xf0901004-0xf0901403] registered
    [ 0.013] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
    [ 0.013] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
    [ 0.013] syscon f0440154.syscon: regmap [mem 0xf0440154-0xf0440157] registered
    [ 0.014] syscon f0440354.syscon: regmap [mem 0xf0440354-0xf0440357] registered
    [ 0.014] syscon f0440400.syscon: regmap [mem 0xf0440400-0xf0440403] registered
    [ 0.015] hw-breakpoint: Failed to enable monitor mode on CPU 0.
    [ 0.015] Broadcom Brahma-B15 readahead cache at: 0xfc442478
    [ 0.025] bio: create slab <bio-0> at 0
    [ 0.025] brcmstb-gpio f040a200.gpio: Registered 5 banks (GPIO(s): 0-159)
    [ 0.026] brcmstb-gpio f0417300.gpio: Registered 2 banks (GPIO(s): 160-223)
    [ 0.026] vgaarb: loaded
    [ 0.026] SCSI subsystem initialized
    [ 0.026] libata version 3.00 loaded.
    [ 0.027] usbcore: registered new interface driver usbfs
    [ 0.027] usbcore: registered new interface driver hub
    [ 0.027] usbcore: registered new device driver usb
    [ 0.027] Linux video capture interface: v2.00
    [ 0.028] Advanced Linux Sound Architecture Driver Initialized.
    [ 0.028] Bluetooth: Core ver 2.21
    [ 0.028] NET: Registered protocol family 31
    [ 0.028] Bluetooth: HCI device and connection manager initialized
    [ 0.028] Bluetooth: HCI socket layer initialized
    [ 0.028] Bluetooth: L2CAP socket layer initialized
    [ 0.028] cfg80211: Calling CRDA to update world regulatory domain
    [ 0.028] nfc: nfc_init: NFC Core ver 0.1
    [ 0.028] NET: Registered protocol family 39
    [ 0.028] brcm-pci f0470000.pcie: adjusting to legacy (broken) pcie DT
    [ 0.029] brcm-pci f0470000.pcie: cannot get msi intr; MSI disabled
    [ 0.129] brcm-pci f0470000.pcie: link down
    [ 0.129] PCI host bridge to bus 0000:00
    [ 0.129] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xc7ffffff]
    [ 0.129] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xcfffffff]
    [ 0.129] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xd7ffffff]
    [ 0.129] pci_bus 0000:00: root bus resource [mem 0xd8000000-0xdfffffff]
    [ 0.129] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
    [ 0.129] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
    [ 0.129] pci 0000:00:00.0: [14e4:7250] type 01 class 0x060400
    [ 0.129] brcm-pci f0470000.pcie: found device 14e4:7250 on bus 0 (PCIe0), slot 0 (irq 77)
    [ 0.129] pci 0000:00:00.0: PME# supported from D0 D3hot
    [ 0.129] PCI: bus0: Fast back to back transfers disabled
    [ 0.129] PCI: bus1: Fast back to back transfers enabled
    [ 0.129] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
    [ 0.129] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
    [ 0.129] pci 0000:00:00.0: PCI bridge to [bus 01]
    [ 0.129] Switched to clocksource arch_sys_counter
    [ 0.131] NET: Registered protocol family 2
    [ 0.131] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.131] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.131] TCP: Hash tables configured (established 2048 bind 2048)
    [ 0.131] TCP: reno registered
    [ 0.131] UDP hash table entries: 256 (order: 0, 4096 bytes)
    [ 0.131] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    [ 0.131] NET: Registered protocol family 1
    [ 0.131] RPC: Registered named UNIX socket transport module.
    [ 0.131] RPC: Registered udp transport module.
    [ 0.131] RPC: Registered tcp transport module.
    [ 0.131] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 0.131] PCI: CLS 0 bytes, default 64
    [ 0.147] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
    [ 0.148] futex hash table entries: 256 (order: -1, 3072 bytes)
    [ 0.204] bounce pool size: 64 pages
    [ 0.209] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [ 0.210] NTFS driver 2.1.30 [Flags: R/O].
    [ 0.211] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
    [ 0.211] fuse init (API version 7.22)
    [ 0.211] msgmni has been set to 475
    [ 0.212] io scheduler noop registered
    [ 0.212] io scheduler deadline registered (default)
    [ 0.212] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
    [ 0.213] PCI: enabling device 0000:00:00.0 (0000 -> 0003)
    [ 0.213] aer 0000:00:00.0:pcie02: service driver aer loaded
    [ 0.213] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
    [ 0.213] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded
    [ 0.213] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.214] 8250: claimed GPIO 175 for serial polarity inversion (active low)
    [ 0.214] f040b400.serial: ttyS0 at MMIO 0xf040b400 (irq = 101, base_baud = 5062500) is a 16550A
    [ 0.218] brd: module loaded
    [ 0.220] loop: module loaded
    [ 0.221] brcmnand f0442800.nand: using HIF_INTR2 cascaded IRQ
    [ 0.221] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xda
    [ 0.221] nand: Unknown NAND 256MiB 3,3V 8-bit
    [ 0.221] nand: 256MiB, SLC, page size: 2048, OOB size: 64
    [ 0.221] brcmnand f0442800.nand: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
    [ 0.221] brcmstb_nand_setup_dev: use_prefetch=1
    [ 0.222] Bad block table found at page 131008, version 0x01
    [ 0.222] Bad block table found at page 130944, version 0x01
    [ 0.222] 7 ofpart partitions found on MTD device f0442800.nand
    [ 0.222] Creating 7 MTD partitions on "f0442800.nand":
    [ 0.222] 0x000000000000-0x000000180000 : "flash0.bolt"
    [ 0.222] 0x000000180000-0x000000280000 : "flash0.nvram"
    [ 0.223] 0x000000280000-0x000000400000 : "flash0.devid"
    [ 0.223] 0x000000400000-0x000000e00000 : "flash0.rescue"
    [ 0.224] 0x000000e00000-0x000001e00000 : "flash0.kernel"
    [ 0.224] 0x000001e00000-0x000010000000 : "flash0.ubi"
    [ 0.225] 0x000000000000-0x000010000000 : "flash0"
    [ 0.225] ubiblk: major device number is 254
    [ 0.226] spi-brcmstb-mspi f0416000.spi: no mspi_done IRQ defined. Will poll.
    [ 0.227] libphy: Fixed MDIO Bus: probed
    [ 0.227] bcmgenet f0b60000.ethernet: GENET 4.3 EPHY: 0x00f0
    [ 0.230] libphy: bcmgenet MII bus: probed
    [ 0.232] PPP generic driver version 2.4.2
    [ 0.232] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
    [ 0.232] usbcore: registered new interface driver pegasus
    [ 0.232] usbcore: registered new interface driver asix
    [ 0.232] usbcore: registered new interface driver ax88179_178a
    [ 0.232] usbcore: registered new interface driver cdc_ether
    [ 0.232] usbcore: registered new interface driver net1080
    [ 0.232] usbcore: registered new interface driver cdc_subset
    [ 0.232] usbcore: registered new interface driver zaurus
    [ 0.232] usbcore: registered new interface driver cdc_ncm
    [ 0.232] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.232] ehci-pci: EHCI PCI platform driver
    [ 0.232] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.232] ohci-pci: OHCI PCI platform driver
    [ 0.233] usbcore: registered new interface driver cdc_acm
    [ 0.233] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
    [ 0.233] usbcore: registered new interface driver usblp
    [ 0.233] usbcore: registered new interface driver usb-storage
    [ 0.233] usbcore: registered new interface driver usbserial
    [ 0.233] usbcore: registered new interface driver ch341
    [ 0.233] usbserial: USB Serial support registered for ch341-uart
    [ 0.233] usbcore: registered new interface driver cp210x
    [ 0.233] usbserial: USB Serial support registered for cp210x
    [ 0.233] usbcore: registered new interface driver ftdi_sio
    [ 0.233] usbserial: USB Serial support registered for FTDI USB Serial Device
    [ 0.233] usbcore: registered new interface driver option
    [ 0.233] usbserial: USB Serial support registered for GSM modem (1-port)
    [ 0.233] usbcore: registered new interface driver pl2303
    [ 0.233] usbserial: USB Serial support registered for pl2303
    [ 0.233] usbcore: registered new interface driver sierra
    [ 0.234] usbserial: USB Serial support registered for Sierra USB modem
    [ 0.234] mousedev: PS/2 mouse device common for all mice
    [ 0.234] input: buttons.8 as /devices/buttons.8/input/input0
    [ 0.234] input_polldev: Start poll c0295711
    [ 0.234] elo_mt_input: loaded
    [ 0.234] usbcore: registered new interface driver usbtouchscreen
    [ 0.234] i2c /dev entries driver
    [ 0.235] brcmstb-i2c f0417180.i2c: iicc@390000hz registered in interrupt mode
    [ 0.235] lirc_dev: IR Remote Control driver registered, major 253
    [ 0.235] IR LIRC bridge handler initialized
    [ 0.235] usbcore: registered new interface driver streamzap
    [ 0.235] usbcore: registered new interface driver uvcvideo
    [ 0.235] USB Video Class driver (1.1.1)
    [ 0.235] gspca_main: v2.14.0 registered
    [ 0.235] usbcore: registered new interface driver gspca_zc3xx
    [ 0.235] usbcore: registered new interface driver Philips webcam
    [ 0.235] cpia2: V4L-Driver for Vision CPiA2 based cameras v3.0.1
    [ 0.235] usbcore: registered new interface driver cpia2
    [ 0.236] sdhci: Secure Digital Host Controller Interface driver
    [ 0.236] sdhci: Copyright(c) Pierre Ossman
    [ 0.236] sdhci-pltfm: SDHCI platform and OF driver helper
    [ 0.237] mmc0: no vqmmc regulator found
    [ 0.237] mmc0: no vmmc regulator found
    [ 0.289] mmc0: SDHCI controller on f0440000.sdhci [f0440000.sdhci] using ADMA
    [ 0.300] usbcore: registered new interface driver usbhid
    [ 0.300] usbhid: USB HID core driver
    [ 0.302] usbcore: registered new interface driver snd-usb-audio
    [ 0.304] oprofile: using timer interrupt.
    [ 0.304] u32 classifier
    [ 0.304] Actions configured
    [ 0.304] TCP: cubic registered
    [ 0.309] NET: Registered protocol family 10
    [ 0.309] NET: Registered protocol family 17
    [ 0.312] 8021q: 802.1Q VLAN Support v1.8
    [ 0.312] Key type dns_resolver registered
    [ 0.315] regulator-dummy: disabling
    [ 0.317] ALSA device list:
    [ 0.317] No soundcards found.
    [ 0.318] Warning: unable to open an initial console.
    [ 0.318] Freeing unused kernel memory: 672K (c0676000 - c071e000)
    [ 0.318] init (1): undefined instruction: pc=000a9448
    [ 0.318] Code: f2000c40 e12fff1e f3000c40 e12fff1e (f2a00e00)
    [ 0.318] init (1): undefined instruction: pc=000a9430
    [ 0.318] Code: f2200150 e12fff1e ec510f1e e12fff1e (f3b00300)
    [ 0.318] init (1): undefined instruction: pc=000a9438
    [ 0.318] Code: ec510f1e e12fff1e f3b00300 e12fff1e (f2000c40)
    [ 0.318] init (1): undefined instruction: pc=000a9440
    [ 0.318] Code: f3b00300 e12fff1e f2000c40 e12fff1e (f3000c40)
    [ 0.318] init (1): undefined instruction: pc=000a9428
    [ 0.318] Code: e320f000 e320f000 f2200150 e12fff1e (ec510f1e)
    [ 0.318] kmsg output is not also going to console.
    [ 0.319] initramfs started...
    [ 0.319] UBI: attaching mtd5 to ubi0
    [ 0.398] mmc0: new ultra high speed DDR50 SDHC card at address 0001
    [ 0.398] mmcblk0: mmc0:0001 SD 29.1 GiB
    [ 0.402] mmcblk0: p1
    [ 0.530] random: nonblocking pool is initialized
    [ 0.778] UBI: scanning is finished
    [ 0.783] UBI: attached mtd5 (name "flash0.ubi", size 226 MiB) to ubi0
    [ 0.783] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    [ 0.783] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    [ 0.783] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    [ 0.783] UBI: good PEBs: 1804, bad PEBs: 4, corrupted PEBs: 0
    [ 0.783] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128
    [ 0.783] UBI: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 545534020
    [ 0.783] UBI: available PEBs: 494, total reserved PEBs: 1310, PEBs reserved for bad PEB handling: 36
    [ 0.783] UBI: background thread "ubi_bgt0d" started, PID 727
    [ 0.784] misc ubiblk_ctrl: proxying ubi0:1
    [ 0.784] block ubiblk0_1: created from ubi0:1(rootfs)
    [ 0.784] Verifying rootfs...
    [ 9.803] Mounting rootfs from /dev/ubiblk0_1
    [ 9.917] mount: mounting usbfs on /proc/bus/usb failed: No such file or directory
    [ 9.926] UBI volume is 1804 blocks
    [ 10.092] UBIFS: background thread "ubifs_bgt0_0" started, PID 754
    [ 10.119] UBIFS: mounted UBI device 0, volume 0, name "writable"
    [ 10.119] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    [ 10.120] UBIFS: FS size: 15618048 bytes (14 MiB, 123 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
    [ 10.120] UBIFS: reserved for root: 737678 bytes (720 KiB)
    [ 10.120] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 50A8290E-9344-4FC3-8F14-CFA8F7282261, small LPT model
    [ 10.120] Using user-space nexus
    [ 10.124] bcmdriver: module license 'Proprietary' taints kernel.
    [ 10.124] Disabling lock debugging due to kernel taint
    [ 10.125] BCMDRV: Initializing bcmdriver version $ 4
    [ 10.125] BCMDRV: Total intc words=4,Total Irqs=129
    [ 10.125] BCMDRV: request_irq failed, irq:94 name:UPG_BSC
    [ 10.125] BCMDRV: Initialization complete
    [ 10.209] BRIGHTSIGN boot=6.2.138 rescue=6.2.138 mission=6.2.147 model=HD223 REVD serial=33D77J002604 hw=2104f19 sk=1 sb=1
    [ 10.210] AVS Revision=0.3.2.x V0=0.902V T0=55.017C PV0=0.867V MV0=0.902V
    [ 10.240] usbmount-782: mount mmcblk0 /devices/rdb.4/f0440000.sdhci/mmc_host/mmc0/mmc0:0001/block/mmcblk0
    [ 10.245] usbmount-782: path='/sys/devices/rdb.4/f0440000.sdhci/mmc_host/mmc0/mmc0:0001'
    [ 10.255] mmcblk0: p1
    [ 10.273]
    [ 10.273] Disk /dev/mmcblk0: 31.2 GB, 31293702144 bytes
    [ 10.273] 255 heads, 63 sectors/track, 3804 cylinders, total 61120512 sectors
    [ 10.273] Units = sectors of 1 * 512 = 512 bytes
    [ 10.273]
    [ 10.273] Device Boot Start End Blocks Id System
    [ 10.273] /dev/mmcblk0p1 8192 61120511 30556160 c Win95 FAT32 (LBA)
    [ 10.280] usbmount-782: Considering /dev/mmcblk0p4...
    [ 10.283] usbmount-782: Considering /dev/mmcblk0p3...
    [ 10.285] usbmount-782: Considering /dev/mmcblk0p2...
    [ 10.289] usbmount-782: Considering /dev/mmcblk0p1...
    [ 10.292] usbmount-782: /dev/mmcblk0p1 is a valid block device
    [ 10.326] Starting system message bus: dbus.
    [ 10.391] ID_FS_UUID=3F3C-E7B8
    [ 10.391] ID_FS_UUID_ENC=3F3C-E7B8
    [ 10.391] ID_FS_TYPE=vfat
    [ 10.454] usbmount-782: Filesystem on /dev/mmcblk0p1
    [ 10.546] lttng-sessiond(826):close(3) returning EBADF
    [ 10.564] usbmount-782: ID_FS_TYPE=vfat
    [ 10.610] usbmount-782: device_size=61112320
    [ 10.610] usbmount-782: fsck_timeout=83
    [ 10.617] Spawning a session daemon
    [ 10.617] Session bs created.
    [ 10.617] Traces will be written in /var/volatile/lttng/lttng-traces/bs-19700101-000010
    [ 10.754] UST channel channel0 enabled for session bs
    [ 10.762] RTC type: pcf85063
    [ 10.788] UTC read from RTC: Tue Dec 5 01:04:48 2017
    [ 10.790] Looking for crash dump:
    [ 10.822] Reset causes: 0x80 reboot
    [ 10.823] No post-mortem crash dump available.
    [ 10.824] done.
    [ 10.844] Starting dhcpcd eth0
    [ 10.972] net-configure: eth0 start
    [ 11.010] dhcpcd[869]: dhcpcd not running
    [ 11.018] Name servers string: 198.198.250.50 198.198.250.10
    [ 11.027] dhcpcd[871]: eth0: adding address fe80::92ac:3fff:fe0c:9363
    [ 11.028] dhcpcd[871]: forked to background, child pid 873
    [ 11.036] No inbound bandwidth shaping on eth0
    [ 11.068] DHCP NOCARRIER eth0 down
    [ 11.173] net-configure: eth0 update
    [ 11.177] Power source: PSU
    [ 11.277] fsck.fat 3.0.25 (2014-01-17)
    [ 11.277] /dev/mmcblk0p1: 12 files, 81/1908826 clusters
    [ 11.279] f0b60000.etherne:01: Broadcom BCM7250 PHY revision: 0xf0, patch: 0
    [ 11.282] f0b60000.ethernet: configuring instance for internal PHY
    [ 11.282] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 11.290] dhcpcd[873]: eth0: waiting for carrier
    [ 11.295] ehci-brcm: EHCI BRCM driver
    [ 11.295] ehci-brcm f0490300.ehci_v2: EHCI Host Controller
    [ 11.298] timely: /sbin/dosfsck exited with 0 after 0s
    [ 11.299] usbmount-782: fsck.vfat /dev/mmcblk0p1 succeeded
    [ 11.299] ehci-brcm f0490300.ehci_v2: new USB bus registered, assigned bus number 1
    [ 11.309] ehci-brcm f0490300.ehci_v2: irq 105, io mem 0xf0490300
    [ 11.321] usbmount-782: Successfully mounted /dev/mmcblk0p1 at /storage/sd.fwup
    [ 11.323] usbmount-782: Cleaned up fsck cruft at /storage/sd.fwup
    [ 11.323] usbmount-782: Looking for firmware update at /storage/sd.fwup
    [ 11.331] ehci-brcm f0490300.ehci_v2: USB 2.0 started, EHCI 1.00
    [ 11.342] hub 1-0:1.0: USB hub found
    [ 11.342] hub 1-0:1.0: 1 port detected
    [ 11.342] ehci-brcm f0490500.ehci_v2: EHCI Host Controller
    [ 11.345] ehci-brcm f0490500.ehci_v2: new USB bus registered, assigned bus number 2
    [ 11.355] ehci-brcm f0490500.ehci_v2: irq 106, io mem 0xf0490500
    [ 11.362] USB vidpid=1d6b:0002
    [ 11.369] ehci-brcm f0490500.ehci_v2: USB 2.0 started, EHCI 1.00
    [ 11.377] No appropriate upgrade files found.
    [ 11.378] usbmount-782: Migrating mounted filesystem from /storage/sd.fwup to /storage/sd
    [ 11.378] hub 2-0:1.0: USB hub found
    [ 11.378] hub 2-0:1.0: 1 port detected
    [ 11.400] ohci-brcm: OHCI BRCM driver
    [ 11.400] ohci-brcm f0490400.ohci_v2: BRCM OHCI controller
    [ 11.403] ohci-brcm f0490400.ohci_v2: new USB bus registered, assigned bus number 3
    [ 11.403] ohci-brcm f0490400.ohci_v2: irq 107, io mem 0xf0490400
    [ 11.406] USB vidpid=1d6b:0002
    [ 11.466] hub 3-0:1.0: USB hub found
    [ 11.466] hub 3-0:1.0: 1 port detected
    [ 11.467] ohci-brcm f0490600.ohci_v2: BRCM OHCI controller
    [ 11.470] ohci-brcm f0490600.ohci_v2: new USB bus registered, assigned bus number 4
    [ 11.470] ohci-brcm f0490600.ohci_v2: irq 108, io mem 0xf0490600
    [ 11.475] USB vidpid=1d6b:0001
    [ 11.536] hub 4-0:1.0: USB hub found
    [ 11.536] hub 4-0:1.0: 1 port detected
    [ 11.546] USB vidpid=1d6b:0001
    [ 12.571] Loading Broadcom WiFi:
    [ 12.682] usbcore: registered new interface driver dbus_usbdev
    [ 12.733] usbcore: registered new interface driver btusb
    [ 12.840] WiFi not found
    [ 12.881] net.ipv4.conf.eth0.force_igmp_version = 0
    [ 13.277] Starting extensions message bus:
    [ 13.279] libphy: f0b60000.etherne:01 - Link is Down
    [ 13.283] dbus.
    [ 13.286] Skipping non-extension UBI writable
    [ 13.288] Skipping non-extension UBI rootfs
    [ 13.314] Feature 'EAC3' not set
    [ 13.330] Feature 'AC3' not set
    [ 13.379] share-terminal: serial console only
    [ 13.446] bluetoothd[1086]: Bluetooth daemon 5.40
    [ 13.453] bluetoothd[1086]: Starting SDP server
    [ 13.470] bluetoothd[1086]: kernel lacks bnep-protocol support
    [ 13.470] bluetoothd[1086]: System does not support network plugin
    [ 13.477] bluetoothd[1086]: Failed to open RFKILL control device
    [ 13.478] bluetoothd[1086]: Bluetooth management interface 1.10 initialized
    [ 13.690] Starting BrightSign application...
    [ 14.846] brightsign (1098): undefined instruction: pc=b62bb5a8
    [ 14.846] Code: e320f000 e320f000 f2200150 e12fff1e (ec510f1e)
    [ 14.896] libphy: f0b60000.etherne:01 - Link is Up - 1000/Full
    [ 14.896] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 14.897] dhcpcd[873]: eth0: carrier acquired
    [ 14.935] net-configure: eth0 update
    [ 14.961] dhcpcd[873]: DUID 00:03:00:01:90:ac:3f:0c:93:63
    [ 14.961] dhcpcd[873]: eth0: IAID 3f:0c:93:63
    [ 14.961] dhcpcd[873]: eth0: probing address 10.1.12.78/28
    [ 15.255] BrightSign application pantera-6.2.147 starting
    [ 15.467] 00:00:00.151 nexus_platform_cma: current Linux boot parameters: 'bmem=544m@256m'
    [ 15.480] Maximum audio sample rate supported: 192000Hz
    [ 15.482] *** 00:00:00.001 nexus_platform_cma: MEMC0 Placed HEAP[1] 32MBytes(0x2000000 Bytes) with alignment 0x1000000 SAGE at 0x010000000 (256 MByte)
    [ 15.482] *** 00:00:00.001 nexus_platform_cma: MEMC0 Placed HEAP[3] 48MBytes(0x3000000 Bytes) with alignment 0x1000000 SAGE at 0x012000000 (288 MByte)
    [ 15.482] *** 00:00:00.001 nexus_platform_cma: MEMC0 Placed HEAP[0] 64MBytes(0x4000000 Bytes) with alignment 0x1000000 SAGE at 0x015000000 (336 MByte)
    [ 15.482] *** 00:00:00.001 nexus_platform_cma: MEMC0 Placed HEAP[5] 280MBytes(0x11800000 Bytes) with alignment 0 at 0x019000000 (400 MByte)
    [ 15.482] *** 00:00:00.001 nexus_platform_cma: MEMC0 Placed HEAP[4] 110MBytes(0x6e85000 Bytes) with alignment 0 at 0x02a800000 (680 MByte)
    [ 15.482] *** 00:00:00.001 nexus_platform_cma: MEMC0 Placed HEAP[2] 4MBytes(0x400000 Bytes) with alignment 0 at 0x031685000 (790 MByte)
    [ 15.489] *** 00:00:00.009 BCHP_PWR:
    [ 15.489]
    [ 15.489] *** 00:00:00.009 BCHP_PWR: ****************************************
    [ 15.489] *** 00:00:00.009 BCHP_PWR: ****************************************
    [ 15.489] *** 00:00:00.009 BCHP_PWR: ** BCHP_PWR POWER MANAGEMENT DISABLED **
    [ 15.489] *** 00:00:00.009 BCHP_PWR: ****************************************
    [ 15.489] *** 00:00:00.009 BCHP_PWR: ****************************************
    [ 15.489] *** 00:00:00.009 BCHP_PWR:
    [ 15.489]
    [ 15.512] *** 00:00:00.031 nexus_platform: pantera B0 16.1, boxmode 6, product 72501 B0
    [ 15.512] *** 00:00:00.032 nexus_platform_97250: *** 97250 BoxMode 6:Display:UHD+SD, Video:10-bit HD/no PIP, Transcode:None ***
    [ 15.529] *** 00:00:00.048 BHSM: BSP Platform[4.2.0] BSECK[3.0.0] verified[yes] modes[0x0F]
    [ 15.721] dhcpcd[873]: eth0: soliciting an IPv6 router
    [ 15.736] 00:00:00.255 nexus_sage_module: alloc sageSecureHeap 33554432 bytes
    [ 15.736] 00:00:00.256 BSAGElib: BSAGElib_P_GetChipsetType - Chip Type: ZB
    [ 15.738] *** 00:00:00.257 bdsp_raaga_img: DDP decoding is not supported
    [ 15.765] *** 00:00:00.284 nexus_picture_decoder: FW download not used
    [ 15.799] !!!Error BERR_INVALID_PARAMETER(0x2) at magnum/basemodules/dsp/src/raaga/firmware/fp2012/bdsp_raaga_img.c:1422
    [ 15.799] ### 00:00:00.319 bdsp_raaga_fw_algo: Error in Opening the Image Interface for FW_ID =24
    [ 15.799] !!!Error BERR_INVALID_PARAMETER(0x2) at magnum/basemodules/dsp/src/raaga/bdsp_raaga_fw_algo.c:5729
    [ 15.799] !!!Error BERR_INVALID_PARAMETER(0x2) at magnum/basemodules/dsp/src/raaga/firmware/fp2012/bdsp_raaga_img.c:1422
    [ 15.799] ### 00:00:00.319 bdsp_raaga_fw_algo: Error in Opening the Image Interface for FW_ID =25
    [ 15.799] !!!Error BERR_INVALID_PARAMETER(0x2) at magnum/basemodules/dsp/src/raaga/bdsp_raaga_fw_algo.c:5729
    [ 15.799] !!!Error BERR_INVALID_PARAMETER(0x2) at magnum/basemodules/dsp/src/raaga/firmware/fp2012/bdsp_raaga_img.c:1422
    [ 15.799] ### 00:00:00.319 bdsp_raaga_fw_algo: Error in Opening the Image Interface for FW_ID =26
    [ 15.799] !!!Error BERR_INVALID_PARAMETER(0x2) at magnum/basemodules/dsp/src/raaga/bdsp_raaga_fw_algo.c:5729
    [ 15.799] !!!Error BERR_INVALID_PARAMETER(0x2) at magnum/basemodules/dsp/src/raaga/firmware/fp2012/bdsp_raaga_img.c:1422
    [ 15.799] ### 00:00:00.319 bdsp_raaga_fw_algo: Error in Opening the Image Interface for FW_ID =24
    [ 15.799] !!!Error BERR_INVALID_PARAMETER(0x2) at magnum/basemodules/dsp/src/raaga/bdsp_raaga_fw_algo.c:5729
    [ 15.799] !!!Error BERR_INVALID_PARAMETER(0x2) at magnum/basemodules/dsp/src/raaga/firmware/fp2012/bdsp_raaga_img.c:1422
    [ 15.799] ### 00:00:00.319 bdsp_raaga_fw_algo: Error in Opening the Image Interface for FW_ID =25
    [ 15.799] !!!Error BERR_INVALID_PARAMETER(0x2) at magnum/basemodules/dsp/src/raaga/bdsp_raaga_fw_algo.c:5729
    [ 15.799] !!!Error BERR_INVALID_PARAMETER(0x2) at magnum/basemodules/dsp/src/raaga/firmware/fp2012/bdsp_raaga_img.c:1422
    [ 15.799] ### 00:00:00.319 bdsp_raaga_fw_algo: Error in Opening the Image Interface for FW_ID =26
    [ 15.799] !!!Error BERR_INVALID_PARAMETER(0x2) at magnum/basemodules/dsp/src/raaga/bdsp_raaga_fw_algo.c:5729
    [ 15.915] *** 00:00:00.434 BXVD: BXVD_Open() - Hardware revision: Q, Firmware revision: 190415
    [ 15.935] 00:00:00.454 bdsp_raaga_priv: BDSP Firmware Version 12p4p0p0
    [ 15.946] *** 00:00:00.465 nexus_platform_97250: NEXUS_Platform_P_DdcPinsAreSwapped: DDC clock and data pins are not swapped
    [ 15.975] *** 00:00:00.495 BHDM_EDID: Checksum: 0X9F
    [ 15.975] *** 00:00:00.495 BHDM_EDID: Invalid Checksum Byte: 0XAE
    [ 15.975] *** 00:00:00.495 BHDM_EDID: Correct Checksum Byte = 0XF
    [ 15.975] *** 00:00:00.495 BHDM_EDID: Checksum Error for EDID Block #1 Ignored
    [ 16.003] *** 00:00:00.523 BHDM_EDID: Checksum: 0X9F
    [ 16.003] *** 00:00:00.523 BHDM_EDID: Invalid Checksum Byte: 0XAE
    [ 16.003] *** 00:00:00.523 BHDM_EDID: Correct Checksum Byte = 0XF
    [ 16.003] *** 00:00:00.523 BHDM_EDID: Checksum Error for EDID Block #1 Ignored
    [ 16.004] *** 00:00:00.523 nexus_platform: initialized
    [ 16.004] *** 00:00:00.524 drm_common: DRM_Common_BasicInitialize - ******* Initializing Common DRM core (CMNDRM 1.26) *******
    [ 16.061] *** 00:00:00.581 BHDM_EDID: Checksum: 0X9F
    [ 16.061] *** 00:00:00.581 BHDM_EDID: Invalid Checksum Byte: 0XAE
    [ 16.061] *** 00:00:00.581 BHDM_EDID: Correct Checksum Byte = 0XF
    [ 16.061] *** 00:00:00.581 BHDM_EDID: Checksum Error for EDID Block #1 Ignored
    [ 16.083] NetworkTime: server changed to 'http://time.brightsignnetwork.com'
    [ 16.083] NetworkTime: Configuration changed.
    [ 16.095] commandline read: brightsign
    [ 16.096]
    [ 16.096] ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.17 |~~~~~~~~~~~~~~~~~~~~~~~~~~
    [ 16.096] (c) 2001-2012 The world wide DirectFB Open Source Community
    [ 16.096] (c) 2000-2004 Convergence (integrated media) GmbH
    [ 16.096] ----------------------------------------------------------------
    [ 16.096]
    [ 16.114] (*) DirectFB/Core: Single Application Core. (2017-05-16 21:31) [ DEBUG ]
    [ 16.158] (*) Direct/Memcpy: Using libc memcpy()
    [ 16.159] *** 00:00:00.000 platform_init: Broadcom Corporation DirectFB Platform Layer Version 7.0
    [ 16.160] *** 00:00:00.000 nexus_common_init: Display heap: handle=0x6c2118 size 286720kB - free 286720kB - largest block 286720kB
    [ 16.160] *** 00:00:00.000 nexus_common_init: Offscreen heap: handle=0x6c2118 size 286720kB - free 286720kB - largest block 286720kB
    [ 16.188] (*) DirectFB/Graphics: Broadcom Corporation Bcmnexus Packet Buffer GFX Driver 4.3 (Broadcom Corporation)
    [ 16.275] (*) Direct/Thread: Started 'BRCM NotifyDisplay' (-1) [OUTPUT OTHER/OTHER 0/0] <1048576>...
    [ 16.283] (*) DirectFB/Core/WM: Default 0.3 (directfb.org)
    [ 16.425] 00:00:00.265 BHDM: Tx0: Output Fmt: 1080i (RGB (Default) 24 bpp) 1920 [+] x 540/540 [+]
    [ 16.425] 00:00:00.265 BHDM: Tx0: Pixel Clock: 74.25 MHz (TMDS Character Rate 74.26 Mcsc)
    [ 16.425] 00:00:00.265 BHDM: Tx0: Output Mode: DVI (Video Only)
    [ 16.427] *** 00:00:00.267 BHDM_EDID: Not UHD - using colorimetry 1
    [ 16.531] 00:00:00.371 BHDM: Tx0: Output Fmt: 720p@24 (RGB (Default) 24 bpp) 1280 [+] x 720/720 [+]
    [ 16.531] 00:00:00.371 BHDM: Tx0: Pixel Clock: 59.40 MHz (TMDS Character Rate 59.41 Mcsc)
    [ 16.576] *** 00:00:00.416 nexus_statistics_api: NEXUS_Display_AddOutput[display:High] 152520 usec
    [ 16.577] *** 00:00:00.417 platform_nexus_display: HDMI hotplug event: connected
    [ 16.577] *** 00:00:00.417 BHDM_EDID: Not UHD - using colorimetry 1
    [ 16.678] *** 00:00:00.518 nexus_statistics_callback: TaskCallback callback 0x727870:0xb649f6b1 from modules/hdmi_output/src/nexus_hdmi_output.c:387 100927 usec
    [ 16.678] *** 00:00:00.518 nexus_statistics_module: hdmi_output[Low] nexus/core/syncthunk/nexus_hdmi_output_thunks.c:21 100838 usec
    [ 16.678] *** 00:00:00.518 nexus_statistics_api: NEXUS_HdmiOutput_GetVendorSpecificInfoFrame[hdmi_output:Low] 100892 usec
    [ 16.698] *** 00:00:00.539 BHDM_EDID: Not UHD - using colorimetry 1
    [ 16.799] *** 00:00:00.640 nexus_statistics_callback: TaskCallback callback 0x727870:0xb649f6b1 from modules/hdmi_output/src/nexus_hdmi_output.c:387 100926 usec
    [ 16.799] *** 00:00:00.640 nexus_statistics_module: hdmi_output[Low] nexus/core/syncthunk/nexus_hdmi_output_thunks.c:21 100844 usec
    [ 16.799] *** 00:00:00.640 nexus_statistics_api: NEXUS_HdmiOutput_GetVendorSpecificInfoFrame[hdmi_output:Low] 100878 usec
    [ 17.505] *** 00:00:01.346 BHDM_SCDC: Attached Rx <NOVA HD HDMI > does not support SCDC (Status and Control Data Channel) - carrying on regardless
    [ 17.518] 00:00:01.358 nexus_hdmi_output: HDMI Link Scramble Status: Normal video
    [ 18.271] HDCP2.2 TX key read successfully
    [ 18.271] *** 00:00:02.111 BHDM_EDID: Not UHD - using colorimetry 1
    [ 18.372] *** 00:00:02.213 nexus_statistics_callback: TaskCallback callback 0x727870:0xb649f6b1 from modules/hdmi_output/src/nexus_hdmi_output.c:387 101205 usec
    [ 18.767] CreateSurface:47 surface 0x87d2c4 format 0 1920x1200 bytes 9216000 offset 0x19168000 gfdBacking[0]
    [ 18.767] CreateSurface:47 surface 0x87d2fc format 0 1920x1200 bytes 9216000 offset 0x19a32000 gfdBacking[1]
    [ 18.767] CreateSurface:47 surface 0x87d334 format 0 1920x1200 bytes 9216000 offset 0x1a2fc000 gfdBacking[2]
    [ 18.767] bs_native_window_clip_dimensions:640 stretch 0 position 0,0 1280x720 nw 1920x1200 clip 1280x720
    [ 18.767] CreateSurface:47 surface 0xb0305334 format 0 1920x1200 bytes 9216000 offset 0x1abc6000 SwapChain Surface
    [ 18.767] CreateSurface:47 surface 0xb0305370 format 0 1920x1200 bytes 9216000 offset 0x1b490000 SwapChain Surface
    [ 18.767] CreateSurface:47 surface 0xb03053ac format 0 1920x1200 bytes 9216000 offset 0x1bd5a000 SwapChain Surface
    [ 19.405] Loading 'SD:/autorun.brs' (02c7d34e13aa5ce5f925f9f4d0e853aac42c6488)
    [ 19.709] dhcpcd[873]: eth0: using static address 10.1.12.78/28
    [ 19.710] dhcpcd[873]: eth0: adding route to 10.1.12.64/28
    [ 19.710] dhcpcd[873]: eth0: adding default route via 10.1.12.65
    [ 19.719] DHCP STATIC eth0 ip=10.1.12.78 nm=255.255.255.240 gw= domain= dns=198.198.250.50 198.198.250.10
    [ 19.804] net-configure: eth0 update
    [ 19.931] *** 00:00:03.771 BHDM_EDID: Checksum: 0X9F
    [ 19.931] *** 00:00:03.771 BHDM_EDID: Invalid Checksum Byte: 0XAE
    [ 19.931] *** 00:00:03.771 BHDM_EDID: Correct Checksum Byte = 0XF
    [ 19.931] *** 00:00:03.771 BHDM_EDID: Checksum Error for EDID Block #1 Ignored
    [ 19.960] *** 00:00:03.800 BHDM_EDID: Checksum: 0X9F
    [ 19.960] *** 00:00:03.800 BHDM_EDID: Invalid Checksum Byte: 0XAE
    [ 19.960] *** 00:00:03.800 BHDM_EDID: Correct Checksum Byte = 0XF
    [ 19.960] *** 00:00:03.800 BHDM_EDID: Checksum Error for EDID Block #1 Ignored
    [ 20.315] *** 00:00:04.155 BHDM_EDID: Checksum: 0X9F
    [ 20.315] *** 00:00:04.155 BHDM_EDID: Invalid Checksum Byte: 0XAE
    [ 20.315] *** 00:00:04.155 BHDM_EDID: Correct Checksum Byte = 0XF
    [ 20.315] *** 00:00:04.155 BHDM_EDID: Checksum Error for EDID Block #1 Ignored
    [ 20.333] Script runtime error: STOP (runtime error &hf7) in SD:/autorun.brs(793)
    [ 20.333]
    [ 20.333] Press SVC to debug.
    [ 28.784] dhcpcd[873]: eth0: no IPv6 Routers available

Please sign in to leave a comment.